Wireless charging systems can spot foreign metal objects by monitoring changes in electrical properties. However, outdoor charging pads face temperature issues. Changes in temperature can alter the pad’s characteristics, potentially causing the system to mistake environmental changes for debris.
Tesla addresses this limitation by establishing a distribution boundary based on the charging pad’s electrical properties under different operating conditions and without an object present. The system can then compare new measurements against this boundary to determine whether a change indicates a foreign object.

How environmental conditions are separated from foreign objects
Standard object detection relies on tracking changes in a charging pad’s inductance and resistance. The filing describes using resonant frequency and output voltage as parameters that can indicate changes. A foreign object can cause the inductance to decrease and the resistance to increase, allowing the system to identify its presence.
To distinguish changes from the charging pad’s normal electrical behavior, the filing establishes a distribution boundary in a two-dimensional graph of resonant frequency vs. voltage peak.
The system sequentially applies signals at different frequencies to the charging pad’s resonant tank and measures the output magnitude produced by each signal. It then selects the frequency corresponding to the highest output magnitude as the resonant frequency. The system then collects these measurements under different operating conditions, including different temperatures, while no object is present on the coil. These measurements are used to establish the distribution boundary that represents the charging pad’s normal electrical behavior.
Before wireless power transfer begins, the system can repeat the measurement process and plot the resulting resonant frequency and maximum output magnitude on the same two-dimensional plane. If the resulting point falls on one side of the distribution boundary, the system generates a result indicating that an object is present. If it falls on the other side, the system determines that the charging pad is free of objects. The system can then use the object-free result to initiate inductive power transfer to another wireless charging pad.
Why it matters
Foreign metal objects on a wireless charging pad can heat up when exposed to the charging field, making object detection an important safety function. Tesla’s approach accounts for changes in the charging pad’s electrical characteristics under different operating conditions before determining whether an object is present.
If implemented in EV wireless charging systems, the approach could help reduce false detections while allowing charging to automatically begin after the pad has been verified as clear. This system makes EV charging more convenient and safer, leading to less barriers to EV adoption.
U.S. Pat. App. Pub. No. 2026/0299157 titled “Object Detection in Wireless Charging” was filed on March 13, 2026 and published on October 1, 2026. The listed inventor is Suzanne O’Meara.
